Making a Kanna Dai (Part 1) 宮大工が職人技で教える初心者のための鉋台制作動画
HTML-код
- Опубликовано: 27 авг 2024
- Learn Japanese woodworking !
2022, class in ile de france→suikoushya.com...
We will show you the beauty of Japanese woodworking skills, from all angles!
(link below)
linktr.ee/carp...
Recommended videos
www.youtube.co....
#learnwoodworking
#woodworkingtools
#japanesewoodworking
#DylanIwakuni
Online Japanese Carpentry Course through Real Construction⇒www.kickstarter.com/projects/1911438091/online-japanese-carpentry-course-through-real-construction
We are building a Japanese carpentry school in France.
We will document this entire process with drawings, photos and videos, and make it an online course so that everyone can learn about Japanese carpentry in English through this real construction project.
We will use traditional Japanese techniques and construction methods, and use local materials such as wood, stone, and soil to build the most sustainable buildings possible. We hope you enjoy our carpentry learning materials.
Let’s enjoy woodworking together!
昔の大工さんは鉋台まで自作するとは聞いた事がありますが、それを現実に動画で見られるとは。。。。すばらしいです。
this was so helpful on my kanna quest. also, thank you so much for the translator as auto-translate takes some mind-bending tricks to understand meaning.
This is the best how to make a plane that I have watched. Thank you
This is what im waiting for, an english translation of how to make a dai.
Qué placer estar disfrutando de estas clases maestras desde el otro lado del mundo. Saludos desde Argentina!
ノミと、かんな。大工さんに、派材で使わせてもらった。つかかって、出来なかった。(当たり前‼)派こぼれ起こす。🍀🍀🍀🍀凄い業。🍀🍀🍀🍀
道具は、何時もピカピカです。
Verygood .in Japan there is no kind of plane only one
とても上手
As ever, superb craftsmanship and excellent explanations showing the logic and process!!
I learned a lot. Amazing
Is it Dylan translating?
HI Suikoushya , what are the corect angels for Kanna? Is oak would be good wood for this tool
現時香港木工師父都唔用鉋,曰本木工做出鉋係最好,中國人將日本刨子抄到天價,唔識曆史千年都係做出嚟用人手做.
Какой угол наклона ножа?благодарю.
hi do you have plans available, got my hands on a 70mm kanna blade + chipbreaker but i dont have any body to put it in
you can find plans in Dale Brotherton's book. Odate's is good too, but less complete. Kurashige sells daï for 70mm blades
A cuntos grados es la inclinación ?
刃の仕込み角度は45度ですか？
What kind of wood is used for the Kanna Dai?
I use a Japanese oak for the dai.
@@suikoushya Thank you! Would any kind of wood work, or should it be a hard wood?
Hard and flexible wood.
鐫の幅はどの様に選択しているのでしょうか？
すいません。
「鐫」とはどういう意味ですか？
この字を初めて知りました。
もしかして鎬のことかな？
"のみ"の横幅です
幅が狭いと少しの力で削れますが沢山回数を重ねる必要があります。幅が広いと力が必要ですが一度に沢山の作業ができます。もちろん穴より小さな幅である必要があります。
@@suikoushya いつもご返事有難とう御座いますしかも丁寧なご返信とても感謝致します
とても参考に成りました誠に有難とう御座います